MULTIAXIS - Blog

CAMplete TruePath Update - NC Format Released

6/24/2020

CAMplete TruePath V2020.B2476.R1 has been made available for all TruePath customers up to date on maintenance who are using TruePath 2020.

Added custom code support for the start of paths.
User Defined Events for customers using Unigraphics - for setup notes, comments of code before and after tool changes.
Added support for OKK
Added support for G85 reaming cycle
NC Format enhancements for FANUC users (Available through MULTIAXIS)

CAMplete TurnMill Update - NC Format Released

6/22/2020

CAMplete TurnMill V9.0.192.R5 has been made available for all TurnMill customers up to date on maintenance.

Added program parameter to control cutting feed rate decimal place precision.
Added support for posting full radius compensation.
Added program parameter support for controlling coolant.
Update user cycle templates for post processing.
Modified milling approach rotary C axis position prior to X, Y, Z axis position for customers using the face parameter to control the C axis approach by plane.
Add posting support for G32 thread cycle

CAMplete TurnMill Update - New Build Released

5/1/2020

CAMplete TurnMill V9 Build 192 has been made available for all TurnMill customers up to date on maintenance.

Added support for simulating polar milling with full radius compensation.
Improved the accuracy of the 'Zoom To Mouse' mode when using the mouse wheel to change the zoom point.
Improved Mastercam operation mapping for side milling cycles.
Fixed an issue with Gibbs GCI files for upper sub milling arc directions.
Fixed an issue with Gibbs imported arcs converted to point milling.
Fixed an issue where post processing of certain canned cycles with varying hole depths was not using the correct tilted plane calculation for repeated holes.
Fixed an issue with C-axis rotations for B-axis machines at -90 for certain processing modes.
Added support for .WRL file formats.

Introducing CAMplete TruePath 2020

3/20/2020

CAMplete TruePath 2020 is now available for all customers up to date on maintenance with MULTIAXIS. Contact support with your license information for access using the updater application.

NC Format enhancements for FANUC users (Available through MULTIAXIS)

Remote Learning - (COVID-19)

3/18/2020

Your health and safety are priority. As the novel corona-virus (COVID-19) continues to impact communities, we want to encourage remote learning.

Customer with active maintenance subscriptions have access to our MULTIAXIS Theory, which provides a transfer of knowledge on technology in our industry.

Process recommendations from model design and manipulation to CAM program setup and integration.
General process recommendations when working with the FANUC control codes for canned and multiple repetitive cycles.
Managing projects within your group for success.
Introduction to FANUC User Macro B for family of parts, creating custom cycles, and simplifying complex motions and devices.
Understanding FANUC 5-axis and the issues involved and how to deal with them.
Using dynamic control functions on a FANUC control (G43.4 & G68.2)
Using dynamic control adjustment on a FANUC control (G54.2 & G54.4)
Understanding the tool offset during 5-axis and linear rapid motion.
The effects of your fixture when working in 5-axis.
Using 5-axis turning on a FANUC control

https://www.multiaxis.llc/theory.html